Operator, Utility Equipment

Your Impact:

• To operate utility equipment such as small excavators, small loaders, rock breaker, recovery truck, small water truck, telehandler, stemming loader, compactor for road works, wall cleanups etc. at Newmont in a safe and efficient manner.

As Part of Our Team, You Will:

Utility Equipment Pre-Shift and On-Shift Activities

• Attend all pre-shift instruction meetings.
• Communicate with and receive instruction from the Mine Operations Shift Supervisor and follow specified instructions and daily plans for Load and Haul, as well as Mine Dewatering, prior to the execution of activities.
• Perform pre-shift inspections by completing a designated check list.
• Follow laid-down procedures and instructions and methodically work through the assigned checklist.
• Understand standard operating procedures (SOP’s) and standard task procedures (STP’s), according to the assigned work schedule; interpret and execute on the work schedule.
• Participate in job hazard analyses (i.e. non-routine activities), standard operating procedures (SOP’s) and standard task procedures (STP’s).
• Sign-off on any identified hazards with the Supervisor.
• Operate one and / or a variety of fleet equipment such as small excavators, small loaders, rock breaker, recovery truck, small water truck, telehandler, stemming loader, compactor.
• Conduct the following activities:
  • pit wall clean ups.
  • building of windrows.
  • digging trenches and other earthworks.
  • positioning water pipelines.
  • feeding mobile crushers.
  • Maintaining floor grades.
  • Clean and maintain equipment to planned limits.
• Maintain communications with other colleagues in the work area.
• Meet and / or exceed established performance expectations set by management.
• Follow the Fire Suppression Activation System to mitigate risks, if in the event of emergencies.
• Report and escalate all accidents and incidents occurring in the shift immediately to the Supervisor.
• Report any equipment malfunctions or service requirements to the Supervisor at the before, during or after the shift.
• Inspect visually and listen to machinery and equipment to diagnose the cause of malfunctions.
• Record and submit daily production, maintenance and repair activities.
• Assist in developing peers to perform utility equipment duties.
• Perform other related activities, as assigned by the Supervisor.

Utility Equipment Post-Shift Handover

• Communicate and provide work status handovers to incoming Utility Equipment Operator.
• Communicate with the Dispatcher regarding hazards encountered to provide sufficient information to the incoming Operators for the smooth running of Operations.

Stakeholder Management and Engagement

• Communicate with Dispatcher and other Utility Equipment Operators using communication devices such as two-way radios and / or on-board computers.
• Ensure shift work meets established statutory standards.

Health and Safety Management

• Follow all safety policies, procedures and legislation.
• Operate in a safe manner and take steps to prevent minimal wear and tear and / or damage to equipment.
• Perform daily safety inspections on equipment parts such as lights, horns, alarms, mirrors, fire extinguishers, tyre pressure and steering linkages.
• Work without risk or harm to others.
• Report any safety, health and environmental concerns to the Supervisor.
• Inspect work areas and ensure all areas comply with internal Newmont and external regulatory standards.
• Adhere strictly to internal Newmont utility equipment standards.
• Comply with safe utility equipment procedures.
• Maintain a strong focus of safety throughout all activities.
• Provide hands-on assistance during utility equipment operating activities to fellow colleagues to ensure that safe work practices are followed.
• Attend daily morning safety meetings.

Your Training, Skills & Experience Checklist

Formal Qualification (including Professional Registrations):

• Senior High School Certificate.

Additional Knowledge:

• MINCOM Equipment Competency.
• License D & E for trucks.
• Minerals Commission Permit.
• Good knowledge of lockout / tag out procedures.
• General understanding of permitting requirements for various activities.
• General knowledge in mid-to-heavy equipment operation.

Experience:

• Minimum of 1 – 5 years’ experience working with Code D & E Vehicles in an open pit mine environment.

Technical Skills:

• Strong administrative skills.
• Strong listening skills.
• Strong concentration skills.
• Sound planning, organising and prioritising skills.
• Sound analytical and problem-solving skills.
• Sound technical communication (written and verbal) and interpersonal skills.
• Sound information monitoring skills.
• Ability to operate a two-way radio and follow instructions.
• Ability to read and understand documentation.
• Ability to build and maintain positive relationships with peers and supervisor.

Behavioural Attributes

• Attributes:
• Accuracy.
• Continuous learning.
• Detail oriented.
• Flexibility.
• Takes initiative.
• Manual dexterity.
• Precise.
• Proactive.
• Reliable and independent.
• Safety conscious.
• Self-motivated.
• Team player.
• Technically inclined.
• Tenacity.

Your Work Environment

• Candidates in this talent pool may be considered for roles located in Ahafo North or Ahafo South.