Electrical Technician

Accountable For: Responsibilities & Standards

• 2) Maintain and adjust the condition of electrical assets:
• Electrical Systems, Equipment, UPS Batteries, Generators Switchboards, Motors, Wiring, Portable tools etc.
• 1 Comply with relevant authorization procedures, safe working practices and specific instructions.
• 2
• Complete maintenance and preservation in an agreed timescale, using safe and appropriate methods and agreed procedures.
• 3 Ensure resources and spares are planned for and used cost effectively.
• 4
• Ensure the correct, current operating requirements are available for reference.
• 5
• Ensure any assets which have been maintained or had parameters adjusted still comply with specified operating requirements with minimum disruption and with the specified methods, tools and materials.
• 6
• Monitor and record any maintenance or adjustments accurately in work history in MMS.
• 2) Monitor And Assess the Performance And Condition Of Electrical Assets.
• 1 Obtain information or parameters from reliable sources (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment) using approved methods.
• 2 Use monitoring equipment or procedures correctly to assess the condition of electrical assets.
• 3 Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.
• 4 Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.
• 5 Compare current performance with previous assessments and act where differences must be addressed.
• 3) Diagnose Faults in Electrical Assets.
• 1 Respond promptly to problems in line with approved procedures.
• 2 Select appropriate tests and diagnostic procedures and apply them methodically.
• 3 Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.
• 4 Use the results of inspections to determine the appropriate actions to take.
• 5 Record an accurate and full description in the appropriate document history.
• 4) Monitor and Maintain Pollution Control Measures.
• 1 Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits.
• 2 Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation.
• 3 Equipment, waste or other materials for disposal are dealt with according to the correct procedure.
• 4 Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently.
• 5) Emergency Response
• 1 Carry Out Emergency Response role (See Station Bill).
• 2 Demonstrate competence in Emergency Response drills and exercises.