Back to jobs
Configuration Management Drafter - SIE
Posted Today
Job Description
SRNS Site Infrastructure Engineering (SIE) is seeking to hire a Configuration Management Drafter. The SIE group is the Design Authority Engineers for Site Infrastructure Systems which includes Electrical Distribution, Domestic Water, Sanitary Wastewater, Process Water, Steam, Service Water, Chilled Water, Cooling Water, Roadways, Bridges, Dams, and some area administration buildings.
- This position is a drafter supporting upkeep of the SRNS configuration management documents (drawings, system walkdowns, design changes, amendment incorporation, etc.).
- The person hired into this position will be required to work on teams as well as independently. Responsible to ensure the technical baseline design drawings for facility systems are maintained in compliance with site manuals/procedures, and amendments are accurate and incorporated with the proper authorization in a very structured controlled manner to ensure the proper configuration control of the design documents. Evaluates the drawing amendments to verify the changes can be made to the drawings as shown, execute the drawings changes using MicroStation CAD, and route the drawings to the proper authorities for review. Will work closely with Design Authority Engineers/System Engineers to assist them with creating drawings/amendments and perform field walk downs to help specify the design changes needed as well as investigate what components can be utilized for the changes. May function in a variety of coordinator roles that support the facility health such as equipment, facility, or area field walk downs.
- Perform authentication of controlled engineering documents (including Design Changes, Calculations, ESRs, etc.) to ensure the approved copy is transmitted to Document Control.
- Under direct guidance, provide general skill-based support to create drawings and layouts (primarily utilizing CAD to create those documents) in direct or indirect support of site project activities.
- Perform responsibilities by assisting higher level technicians and engineers, by standardized work methods or by receiving explicit instructions. Technical adequacy is reviewed with work in progress or soon after completion.
- Prepare design drawings, including concept sketches and layouts. Review design documents of equipment manufacturers for compatibility and provide comments. Support field inspections to locate existing systems and equipment, verify as-built conditions, and recommend the best approach for modifications. Prepare computer aided design drafting drawings for installation, fabrication, and testing.
- This position is a drafter supporting upkeep of the SRNS configuration management documents (drawings, system walkdowns, design changes, amendment incorporation, etc.).
- The person hired into this position will be required to work on teams as well as independently. Responsible to ensure the technical baseline design drawings for facility systems are maintained in compliance with site manuals/procedures, and amendments are accurate and incorporated with the proper authorization in a very structured controlled manner to ensure the proper configuration control of the design documents. Evaluates the drawing amendments to verify the changes can be made to the drawings as shown, execute the drawings changes using MicroStation CAD, and route the drawings to the proper authorities for review. Will work closely with Design Authority Engineers/System Engineers to assist them with creating drawings/amendments and perform field walk downs to help specify the design changes needed as well as investigate what components can be utilized for the changes. May function in a variety of coordinator roles that support the facility health such as equipment, facility, or area field walk downs.
- Perform authentication of controlled engineering documents (including Design Changes, Calculations, ESRs, etc.) to ensure the approved copy is transmitted to Document Control.
- Under direct guidance, provide general skill-based support to create drawings and layouts (primarily utilizing CAD to create those documents) in direct or indirect support of site project activities.
- Perform responsibilities by assisting higher level technicians and engineers, by standardized work methods or by receiving explicit instructions. Technical adequacy is reviewed with work in progress or soon after completion.
- Prepare design drawings, including concept sketches and layouts. Review design documents of equipment manufacturers for compatibility and provide comments. Support field inspections to locate existing systems and equipment, verify as-built conditions, and recommend the best approach for modifications. Prepare computer aided design drafting drawings for installation, fabrication, and testing.